Support for your
Hob
Filter categories
All articles for Hob support
- 0 and 9 flash alternately
- Booster level turned off early
- Burn stains cannot be removed (gas hob)
- Burner does not ignite
- Burner does not ignite during commissioning
- C on the display
- Comparable cooking processes differ
- Cooking zone switches on/off automatically
- Cooking zones switch off automatically
- Cooking zones will not switch on
- Cooling fan continues to operate after switch-off
- dE on the display
- Drawer under hob warm/hot
- Electric deep fat fryer does not get hot
- Electronic ignition device not working
- Err 039, 040, 408 or 412.
- Err 044
- Err 047, 048 or 049
- Extraction power has decreased and extraction noise has increased
- Fault F
- Fault F (sensor control not covered/soiled)
- Fault F (sensor controls not responding)
- Fault F31 or FE31
- Fault FE 47
- Fault FE44
- Fault FE48
- Fault FE49
- Flame appearance changes
- Flame burns unevenly/too high
- Flame is extinguished
- Flash generated when gas hob switched on
- Food does not start browning
- Food is not cooking
- Food is not crisp and golden
- Gas hob not responding
- Heating up takes too long
- Hob does not get hot
- Hob frame gets hot
- How do I find the model identifier and serial number? (KM 7xxx).
- Induction hob not responding
- In-operation indicator flashing (gas hob)
- L on the display
- LC on the display
- Liquid has got into vapour extraction
- LOC on the display
- Manual activation/deactivation of vapour extraction (KMDA 7774, KMDA 7774-1)
- Missing/unsuitable cookware symbol (PowerFlex)
- Noise during pan recognition (KMDA 7774)
- Noise on left side and in middle
- Noises coming from the induction hob during cooking
- Numerical display does not light up
- Numerical displays light up briefly during switch-on
- Oil has an unpleasant odour
- Pan heating varies across cooking zones
- Part of heat display unilluminated (HiLight hob)
- Power drops of its own accord
- Power level flashing
- Power level goes out and 0 lights up
- Power level not registered
- Residual heat indicators flashing
- Salamander grill browning unit retraction interrupted
- Salamander grill cannot be extended
- Salamander grill cannot be lowered
- Salamander grill is not heating up
- Sensor control combination not working
- Sensor controls show increased sensitivity or fail to react
- Smell and vapours are given off
- Soiling/residue on matt black hob
- Symbols respond without direct contact
- u_ on the display
- Vapour extraction fan power level 3 not running (KMDA 7633, KMDA 7634, KMDA 7774, KMDA 7774-1)
- Vapour extraction not working (KMDA 7774, KMDA 7774-1, CSDA 1040)
- (grease filter) sensor control lights up
- sensor control (active charcoal filter) lights up
- display (positioning aid) lights up
- sensor control (Con@ctivity) does not light up
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual
