PG 8583 CD [WW AD CM OIL]

Laboratory dishwasher with liquid dispensing, DryPlus, conductivity monitoring & oil seals.

For the optimum loading of test tubes up to 12 x 105 mm.

For connecting the Miele printer cable to the appliance.

For optimum water preparation.

For two full or partial demineralisation cartridges.

For fixing delicate wash items.

for PRT 100 report printer.

with serial interface (RS232) for connection to a printer.

For use with selected series G 78 load carriers in PG 85 machines.

to raise the machine, 70 cm deep, 90 cm wide.

For the regeneration of full demineralisation cartridges

For the optimum loading of wide neck flasks, measuring cylinders, etc.

For the optimum loading of test tubes up to 12 x 200 mm.

for protocol printer APH 500 PRT100 and APH 510 PRT110.

height adjustable, for loading & unloading washer-&disinfectors.

For holding different instruments.

3 m, for the extension of connection cable type 1 and 2.

For the optimum loading of injector modules or inserts.

For use with selected series G 78 upper baskets in PG 85 machines.

For the optimum loading of inserts.

For the optimum loading of wide neck flasks, measuring cylinders, etc.

For the optimum loading of injector modules or inserts.

for the gentle holding of 5 microtiter plates.

for loading & unloading washer-&disinfectors.

For the optimum loading of test tubes up to 12 x 165 mm.

for direct connection to PC, length 3 m (type 8).

For the manual filling of single use resins.

For the simple and convenient changing of demineralisation cartridges.

For the gentle cleaning of delicate items by interrupting the spray jet.

for direct connection to PC, length 5 m (type 9).

for the optimum loading of beakers up to 250 ml.

For interruption-free connection to the printer.

10 m, for the extension of connection cable type 1 and 2.

for Segosoft modules.

For holding standard DIN mesh trays as well as various inserts.

with Ethernet connection for integration in a network.

for connection of a machine with serial interface to a PC.

For the optimum loading of wide neck flasks, measuring cylinders, etc.

for the optimum loading of half petri dishes.

For the optimum loading of test tubes up to 12 x 75 mm.

for connection of a machine with serial interface to a PC.

for connection to the network, length 3 m (type 6).

For the optimum loading of beakers from 600 to 1,000 ml.

5 m, for the extension of connection cable type 1 and 2.

for the optimum loading of beakers from 250 to 600 ml.

for connection to the network, length 5 m (type 7).

For optimum water preparation.